VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1 - REPOSITORY Uživatelský manuál stáhnout pdf (Strana 168)

OneCommand™ Manager Application P007997-01A Rev. B

8. Managing Adapters and Ports

OneConnect Adapters

168

Enabling and Disabling OneConnect Physical Ports

Using the Physical Port Info tab you can enable or disable the physical port. When you

disable a physical port, you disable all functions, such as iSCSI and NIC, for the port.

Disabled ports appear in the discovery-tree as a black port icon.

Note: Enabling and Disabling OneConnect physical ports is not supported via the

CIM interface.

Note: You cannot disable a port if PXE Boot is enabled or if any of the iSCSI target

sessions are boot sessions.

To enable or disable a physical port:

1. In the discovery-tree, select the physical port you want to enable or disable.

2. Select the Physical Port Info tab.

3. Click Enable Port or Disable Port.

Setting Port Speed and DAC Cable Length (OneConnect

OCe11102 Series Adapters Only)

The Physical Port info tab enables you to set port speed and DAC cable lengths for

OCe11102 series adapters.

To set the port speed for OCe11102 series adapters:

1. From the discovery-tree, select the OCe11102 series adapter port whose speed you

want to change.

2. Click Set Speed on the Physical Port Info tab. The Change Port Speed dialog box

appears.

Figure 8-62 Change Port Speed Dialog box (Force mode/10Gb speed selected)

3. Set the desired mode and port speed.

4. If you set the Mode to “Force” and the Speed to “10 GB SFP+” you must set the

DAC cable length.

5. Click OK.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 219 220

Žádné komentáře

VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1 - REPOSITORY Uživatelský manuál Strana 168