VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1 - REPOSITORY Uživatelský manuál stáhnout pdf (Strana 55)

OneCommand™ Manager Application P007997-01A Rev. B

5. Configuring Discovery

Configuring iSCSI Target Discovery

2. Click Target Login. The Target Login dialog box appears. The dialog box displays

the Target Name and Target Alias of the target. When you log into a target and

reboot the system, the OneConnect adapter automatically logs in to that target after

the reboot is complete.

3. Specify the Target Login Options and Authentication type you want to use.

4. If more than one Target Portal is available to log into the target, you can select the

target portal you want to use from the Target Portal list. To use the default Target

Portal, check “Use default target portal.”

5. Click OK. If the target was successfully logged into, the target's status in the Targets

table changes to 'Connected'.

Note: If you are logging into a target more than once, or you are logging into the

same target from multiple iSCSI ports, you must have multi-pathing

software installed to properly present the target‘s LUNs to the operating

system.

Manually Adding an iSCSI Target

The iSCSI Target Discovery tab enables you to manually add and log into iSCSI targets.

To manually add an iSCSI target:

1. From the iSCSI Target Discovery tab, click Manually Add Target. The Add iSCSI

Target dialog box appears.

2. Enter the target iSCSI name, target IP address and TCP port number.

3. Specify the Target Login Options and Authentication type you want to use.

4. Check the boot checkbox to add the target as a boot target.

5. Check the auto-login checkbox to login into the target after adding it.

6. Click OK. If the target was successfully added and logged into, the target appears

as ‘Connected’ in the Targets table.

Note: If you add a target with the auto-login checkbox unchecked, a “closed”

target session will be created for the target. This allows you change a

manually added target to a boot target. If you do not login to the target,

upon reboot the system will attempt to login to the target. It will not

automatically be removed as is the case with "discovered" targets.

Removing Targets

To remove a target:

1. Log out of all sessions for the target you want to remove.

2. From the iSCSI Target Discovery tab, select the target you want to remove and click

Remove Target.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 219 220

Žádné komentáře

VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1 - REPOSITORY Uživatelský manuál Strana 55